STUDY GUIDE 3
T2 Unit 3 Study Guide
To help eliminate any inherent weakness, process components shall be protected by two levels of protection that are
A system of manual station which, when activated, will initiate a platform shutdown is the
The major parts of the Emergency support Systems are
The major objective of the platform safety system is to
Any method used on an offshore platform to collect and direct escaped liquid hydrocarbons to a safe location is
The purpose of the production platform safety system is to
The detectable abnormal condition which indicates overflow may occur is
The detectable abnormal conditions for excess temperature in a fired component are
Low pressure, low level, and backflow are detectable abnormal conditions for
Secondary protection from liquid overflow to a downstream component should be provided by the
A gas makeup system is primary protection for
Primary protection from liquid overflow is provided by
Secondary protection from gas blowby shall be provided by
Primary protection from gas blowby is provided by
The detectable abnormal condition which indicates gas blowby may occur is
In fired process components, excess temperature can be caused by
Secondary protection from the undesirable event of liquid overflow to the atmosphere shall be provided by
Primary Protection from the undesirable event of a small gas leak in an enclosed space shall be provided by
Secondary protection from the undesirable event of a small liquid leak shall be provided by
The detectable abnormal condition which indicates overpressure may occur is
Primary protection from the undesirable event of overpressure in an atmospheric vessel shall be provided by
Combustible vapors in addition to that required for normal ignition of either the pilot or main burner is
Temperature in a process component in excess of the rated working temperature is
A leak is defined as the accidental escape of
Pressure in a process component in excess of the maximum allowable working pressure is referred to as
A direct ignition source is defined as
Underpressure is defined as
Gas blowby is defined as
Liquid overflow is defined as
An adverse occurrence in a process component which poses a threat to safety is a(n)
The Safety Analysis Tables (SATs)
A document that lists process components and Emergency Support Systems (ESS) with their required safety devices and list functions performed by each device is
The Safety Analysis Checklist (SAC)
The SDV and PSHLs on crossing pipelines shall be connected to the platform
Incoming pipelines to a platform shall be equipped with
Departing pipelines shall be equipped with a
Safety devices which are required to be present on all incoming and departing pipelines are the responsibility of
The lessee shall maintain safety records of all inspections, repairs and safety device paperwork for a period of
If you observe an oil spill from your facility you must immediately notify
Oil spills of one barrel or more shall be reported orally to the Regional Supervisor of the BSEE
Written confirmation of spills of one barrel or more shall be received by the Regional Supervisor of the BSEE by the
If the lessee observes pollution resulting from operations other than those conducted by the lessee, that lessee shall notify
To determine if pollution is occurring, drilling and production facilities shall be inspected
The lessee shall not create conditions that will pose unreasonable risk to
The responsible party for cleanup and cleanup cost shall be
The purpose of a production platform Surface Safety System is to protect
The system that is installed to collect and direct escaped liquid hydrocarbons to a safe location is
What is the difference between high pressure and overpressure?
Pipeline which run from platform to platform are generally the responsibility of
Pipeline which run from platform to shore are generally the responsibility of
